Cycliq logo

How to Guides

Visual/Audio Alerts Guide for Fly6 Gen3
Battery When charging your Fly6 Gen3, the charge indicator LED (top of the ring bezel) will be solid red. Once the battery is fully charged, this LED will...
Thu, 10 Jun, 2021 at 11:27 AM
How to format your SD card
Needs Hardware Manual and graphics from cycliq plus app There are several ways you can format your SD card but we recommend that you format via the Cycl...
Thu, 10 Jun, 2021 at 11:27 AM
How to perform a bench test
Needs Hardware Manual A bench test is a test to ensure a device works as specified. A bench test for your Fly6 Gen3 device is to check that the life of ...
Thu, 10 Jun, 2021 at 11:26 AM
How to update your Fly6 Gen3 firmware
There is currently no firmware updates available for the Fly6 Gen3 Once a firmware update is available, instructions will be available here.
Tue, 5 Jan, 2021 at 3:50 PM
Fly6 Gen3 Troubleshooting Tools
Performing a Master Reboot The Fly6 Generation 3 must be powered on to perform this reboot. This reboot is only recommended if you are unable to turn th...
Thu, 10 Jun, 2021 at 11:26 AM
How to use the bike alarm on a Fly6 GEN 3
The Fly6 GEN 3 has a bike alarm that can be activated via the CycliqPlus mobile app. If the device is moved while the alarm function is active, the alarm w...
Thu, 10 Jun, 2021 at 11:26 AM
How to register your Fly6 GEN 3
1. Go to https://cycliq.com/register/ and fill in the registration form 2. Select Fly6 GEN 3 and enter your serial number. This can be found by: Connecti...
Wed, 16 Dec, 2020 at 9:40 PM