To turn the Fly12 CE on and start recording, press and hold the power button for at least 2 seconds. Upon powering on, the Fly12 CE will play a power up sequence of beeps followed by up to 4 beeps to indicate battery level. The LED notification light on the side of your camera will flash indicating it is recording, with the colour of the flashing LED also indicating the battery level.
Battery level is under 25% | 1 beep | LED light flashes red |
Battery level is 25-50% | 2 beeps | LED light flashes orange |
Battery level is 50-75% | 3 beeps | LED light flashes green |
Battery level is 75%+ | 4 beeps | LED light flashes green |
For more information on the sounds emitted by the Fly12 CE check out our visual and audio alerts guide here.
Pressing the power button will toggle through the brightness and light modes (constant, pulse, flash or camera only) of the bike light.
Other settings can be customised through the CycliqPlus mobile app or desktop app. These include:
- Logo and timestamp (on/off)
- Electronic Image Stabilisation
- Video resolution
- Segment length
- Light modes available
- Volume of beeps
- Beep intervals