Using your device
TABLE OF CONTENTS Initial Setup Recording on the Fly6 Recording on the Fly12 How to overlay STRAVA metrics Mobile Apps Desktop Apps Common Issue...
Tue, 5 Jan, 2021 at 10:46 AM
To ensure that your devices get a proper charge at the quickest possible time, we recommend using a USB wall charger with an output of 5 volts and 1 to 2 am...
Thu, 24 Jan, 2019 at 11:44 AM
Yes! In order to save video files and change settings, Cycliq units need s storage device installed. Otherwise, it will show an error notification.
Thu, 24 Jan, 2019 at 11:28 AM
Cycliq devices need a Class 10 SD card to function properly. Please check our list of compatible SD card here.
Thu, 24 Jan, 2019 at 12:13 PM
The looping function works in such a way that the last period of the ride is recorded. For a device to loop effectively, you should always leave the files o...
Thu, 24 Jan, 2019 at 11:29 AM
Idle mode is a battery saving mechanism, whereby your unit turns off automatically after sensing no movement for 15 minutes.
Thu, 24 Jan, 2019 at 11:29 AM
In the event of an incident and your device tilts past 60 degrees for more than 5 seconds, the Incident Protection Mode is triggered and you will hear three...
Thu, 24 Jan, 2019 at 11:43 AM
If you witness an event that you want to capture and retain when riding, simply press the WiFi or "Q" button briefly. This will lock the current v...
Thu, 24 Jan, 2019 at 11:31 AM
When your device enters a low battery charge state, Home Safe Mode is triggered. The unit will beep at regular intervals to notify you that the unit's c...
Thu, 24 Jan, 2019 at 11:30 AM
We want you to keep your eyes on the road while being able to get notifications from your device, which is why we have beeps as notification to assist you. ...
Tue, 12 Feb, 2019 at 7:51 AM